Yes, Novacool carries UL listing under the NFPA 18, 2006 edition and contains no ingredients that will harm your existing foam equipment. Many departments are currently using Novacool UEF in place of typical “class A & B” foams as their additive source for compressed air foam systems (CAFS).
No, Novacool UEF is fully biodegradable, non-corrosive and non-toxic.
Novacool UEF has been mixed with many other types of foam and no adverse reactions have been noted such as congealing or drying out. Novacool UEF will not cause any concentrate to de-foam including AR type.
Yes, several departments have placed Novacool UEF directly into their tanks without any problems. Novacool UEF is usable with eductors, injectors, CAFS, or batch mixed; it’s non-corrosive and has no adverse effects on tanks, pumps, valves, and portioning equipment. Batch mixing is particularly necessary for departments that have older trucks or smaller brush trucks that may not have foam-proportioning systems. Novacool UEF is applied at 0.5%. A 500-gallon tank of water only requires 2.5 gallons of Novacool. A brush truck with a 250 gallon tank only needs to carry (1) five gallon bucket of Novacool UEF. This (1) five gallon bucket will treat 5 tanks of water at 0.4%. Novacool can be used all the way down to 0.2% for certain class A fires and still be effective.
No. Novacool UEF is UL listed and certified to N.F.P.A. 18, 2006. In general most manufacturers design their tanks to accommodate foams certified to these standards.
In the absence of a foam proportioning system using a foam eductors is optimal. However, as stated above the solution can be mixed directly into the tank or used through a foam proportioning system. However, if added directly to the tank we recommend some agitation to ensure adequate dilution. Batch mixed Novacool will biodegrade in about 28 days.
No. Novacool UEF contains no harsh detergents, or other ingredients that will damage the environment. It does not have adverse effects on the truck or the property you are protecting
No. Novacool UEF is non-toxic and biodegradable. Novacool exceeds EPA guidelines and has been extensively tested. Novacool contains no EPA or DOT reportable ingredients and does not contain any nonylphenolexthoxylates (Nape’s) or glycol ethers.
No. If you already using class A or B foam on a regular basis, then you are ready to go. The only training that is required is for the pump engineer who needs to know what percentage is required. Departments can use existing equipment, including nozzles, etc. There are however, some techniques that will enhance the application of Novacool, but typically these techniques can be accomplished with existing equipment.